Graphtec FC8600 Series

Mesin Cutting Sticker Graphtec FC8600

Mesin Cutting Sticker Graphtec FC8600, merupakan versi modifikasi dari Seri pendahulunya yaitu FC8000. Perbedaan paling signifikan adalah penggunakan antarmuka / interface Jaringan LAN. Antarmuka ini sebagai tambahan standar Port Serial RS232 sebagai umum digunakan.

Dari segi aplikasi mesin cutting sticker Graphtec FC8600 kurang lebih sama penggunaan-nya dengan seri CE6000 yang juga keluaran Graphtec Japan. Akan tetapi dari segi spesifikasi, mesin ini memiliki data teknis yang lumayan jauh lebih tinggi dibankan dengan seri yang lain dengan tipe sejenis.

Spesifikasi Lengkap Mesin Cutting Sticker Graphtec FC8600 :

<td width="110">
  FC8600-60
</td>

<td width="110">
  FC8600-75
</td>

<td width="110">
  FC8600-100
</td>

<td width="110">
  FC8600-130
</td>

<td width="110">
  FC8600-160
</td>

<td colspan="5" width="550">
  32-bit CPU
</td>

<td colspan="5" width="550">
  Grit rolling type
</td>

<td colspan="5" width="550">
  Digital servo drive
</td>

<td width="110">
  610 mm x 50 m
</td>

<td width="110">
  762 mm x 50 m
</td>

<td width="110">
  1067 mm x 50 m
</td>

<td width="110">
  1372 mm x 50 m
</td>

<td width="110">
  1626 mm x 50 m
</td>

<td>
  590 mm x 15 m
</td>

<td>
  742 mm x 15 m
</td>

<td width="110">
  1043 mm x 10 m, 894 mm x 15 m
</td>

<td width="110">
  1342 mm x 10 m, 894 mm x 15 m
</td>

<td width="110">
  1603 mm x 10 m, 894 mm x 15 m
</td>

<td width="110">
  Min. 50 mm
</td>

<td width="110">
  Min. 50 mm
</td>

<td width="110">
  Min. 50 mm
</td>

<td width="110">
  Min. 50 mm
</td>

<td width="110">
  Min. 50 mm
</td>

<td width="110">
  Max. 920 mm
</td>

<td width="110">
  Max. 1224 mm
</td>

<td width="110">
  Max. 1529 mm
</td>

<td width="110">
  Max. 1850 mm
</td>

<td width="110">
  734 mm
</td>

<td width="110">
  886 mm
</td>

<td width="110">
  1191 mm
</td>

<td width="110">
  1496 mm
</td>

<td width="110">
  1750 mm
</td>

<td width="110">
  2 rollers
</td>

<td width="110">
  2 rollers
</td>

<td width="110">
  3 rollers
</td>

<td width="110">
  3 rollers
</td>

<td width="110">
  4 rollers
</td>

<td colspan="5" width="550">
  1485 mm/s at 45° direction
</td>

<td colspan="5" width="550">
  Max. 39.2 m/s<sup>2</sup> (4 G) in 8 steps
</td>

<td colspan="5" width="550">
  Max. 5.88 N (600 gf) in 48 steps
</td>

<td colspan="5" width="550">
  0.005 mm
</td>

<td colspan="5" width="550">
  GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL&#x2122;: 0.025 mm
</td>

<td colspan="5" width="550">
  Max. 0.1 mm or 0.1 % of plotted length
</td>

<td colspan="5" width="550">
  Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
</td>

<td colspan="5" width="550">
  Approx. 3 mm alphanumeric (varies depending on character font and media)
</td>

<td colspan="5" width="550">
  1 tool (cutting blade, plotting pen or pouncing tool) in standard;
</td>

<td colspan="5" width="550">
  Supersteel (0.9 mm or 1.5 mm diameter)
</td>

<td colspan="5" width="550">
  Water-based fiber-tip pen, Oil-based ballpoint pen
</td>

<td colspan="5" width="550">
  Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
</td>

<td colspan="5" width="550">
  Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
</td>

<td colspan="5" width="550">
  Regular paper from 0.06 to 0.13 mm thick
</td>

<td colspan="5" width="550">
  Built into the tool carriage
</td>

<td colspan="5" width="550">
  Built into the tool carriage
</td>

<td colspan="5" width="550">
  Supported (performed by force control)
</td>

<td colspan="5" width="550">
  Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
</td>

<td colspan="5" width="550">
  USB2.0 (Full speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
</td>

<td colspan="5" width="550">
  2 MB
</td>

<td colspan="5" width="550">
  GP-GL / HP-GL&#x2122; emulation (Set by menu or command, and selects from GP-GL, HP-GL&#x2122;, or Auto select)
</td>

<td colspan="5" width="550">
  Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
</td>

<td colspan="5" width="550">
  Graphic type LCD (3-inch, backlight)
</td>

<td colspan="5" width="550">
  100 V to 240 V AC, 50 / 60 Hz
</td>

<td colspan="5" width="550">
  Max. 160 VA
</td>

<td colspan="5" width="550">
  10 to 35 °C, 35 to 75 % R.H. (non-condensing)
</td>

<td colspan="5" width="550">
  16 to 32 °C, 35 to 70 % R.H. (non-condensing)
</td>

<td width="110">
  Approx. 1128 x 715 x 1219 mm
</td>

<td width="110">
  Approx. 1278 x 715 x 1219 mm
</td>

<td width="110">
  Approx. 1578 x 715 x 1219 mm
</td>

<td width="110">
  Approx. 1878 x 715 x 1219 mm
</td>

<td width="110">
  Approx. 2138 x 715 x 1219 mm
</td>

<td width="110">
  Approx. 38 kg
</td>

<td width="110">
  Approx. 42 kg
</td>

<td width="110">
  Approx. 46 kg
</td>

<td width="110">
  Approx. 50 kg
</td>

<td width="110">
  Approx. 59 kg
</td>

<td width="110">
  including stand
</td>

<td width="110">
  including stand
</td>

<td width="110">
  including stand
</td>

<td width="110">
  including stand
</td>

<td colspan="5" width="550">
  Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3
</td>

<td colspan="5" width="550">
  Windows 8 (8 / Pro / Enterprise)
</td>

<td colspan="5" width="550">
  UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
</td>
Model
CPU
Konfigurasi
Drive method
Area Potong Maks. (W x L) (*1)
Garansi Akurasi Area Potong (*2)
Lebar Media yang dapat dipasang
Max. 770 mm
Lebar Potong Pintas Maks
Jumlah Push Roller
Kecepatan Potong Maks
Akselerasi Aksial
Tekanan Potong
Resolusi Mekanik
Resolusi Terprogram
Akurasi Jarak (*2)
Pengulangan (*2)
Ukuran Karakter Minimum
Jumah Alat Yang dapat Dipasang
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Tipe Pisau
Tipe Pena
Tipe Alat Pouncing
Tipe Media (*3)
Sandblast resist rubber up to 1 mm thick
Kertas Kompatibel Untuk Pouncing
Lampu Penunjuk
Pisau Potong Pintas
Pemotongan Perforasi
Registration mark sensing system
Antarmuka Standar
Memori Cadangan
Set Perintah
Pengaturan Kondisi
Layar
Sumber Daya
Komsumsi Daya
Operating environment
Garansi Akurasi
Dimensi (W x D x H)
Bobot
including stand
Program Bawaan (*4)
OS Kompatibel (*4)
Windows 7 (Ultimate / Enterprise / Professional / Home Premium)
Windows Vista (Ultimate / Enterprise / Business / Home Premium / Home Basic)
Windows XP (Professional / Home Edition)
Macintosh OS 10.5.8 to 10.8
Standar Kompatibel
FCC-A, EN55022-A
*1 Saat Pegangan Pena kedua dipasang, area potong maksimum berubah. (FC8600-60: 601 mm, FC8600-75: 753 mm, FC8600-100: 1053 mm, FC8600-130: 1352 mm, FC8600-160: 1613 mm)
*2 Dioperasikan dengan kondisi potong tertentu dari Graphtec. Pada Pemotongan panjang, keranjang digunakan.
*3 Jika beberapa jenis rekfektif film instensitas tinggi digunakan, direkomendasikan untuk penggunaan pisau CB15UA/CB15UA-K30 dan penguatan alas belakang media (backing sheet).
*4 Untuk informasi OS Kompitibel or Program Aplikasi, silahkan cek website atau hubungi representatif lokal Graphtec

Apabila anda memiliki pertanyaan seputar mesin cutting sticker Graphtec FC8600 silahkan hubungi kami.

Kami juga menjual mesin cutting plotter di :