Mesin Cutting Sticker Graphtec CE6000 merupakan mesin cutting generasi terbaru yang dikeluarkan oleh pabrikan GRAPHTEC Jepang.
Menggantikan seri CE5000 yang sudah terkenal bagi para pemain cutting sticker. CE6000 hadir dengan fitur yang lebih baru dengan tujuan agar dapat lebih mudah digunakan. Serta menjadi produk terdepan untuk mesin cutting sticker dikelasnya.
Layar monitor yang menyerupai dengan seri diatasnya yaitu FC8000 untuk dapat mempermudah pemakai untuk mengakses fungsi-fungsi Mesin.
|
Item
|
<td width="136">
CE6000-40
</td>
<td width="136">
CE6000-60
</td>
<td width="136">
CE6000-120
</td>
<td width="136">
CE6000-120-AMO
</td>
|
CPU
|
<td colspan="4" width="544">
32-bit CPU
</td>
|
Konfigurasi
|
<td colspan="4" width="544">
Grit rolling type, digital servo drive
</td>
|
Area Potong Maks
|
<td width="136">
375 mm x 50 m <sup>*1</sup>
</td>
<td width="136">
603 mm x 50 m <sup>*1</sup>
</td>
<td colspan="2" width="272">
1213 mm x 50 m <sup>*1</sup>
</td>
|
(Garansi Area Potong)
|
<td width="136">
(356 mm x 2 m <sup>*1</sup>)
</td>
<td width="136">
(584 mm x 5 m <sup>*1</sup>)
</td>
<td colspan="2" width="272">
(1194 mm x 5 m <sup>*1</sup>)
</td>
|
Batas Scanning Mark
|
<td colspan="4" width="544">
Type 1 mark: Front 15 mm, Rear 35 mm, Left/Right 15 mm
</td>
|
Type 2 mark: Front 17 mm, Rear 37 mm, Left/Right 15 mm (Length of media up to 2 m)
|
|
Jumlah Push Roller
|
<td width="136">
2 rollers
</td>
<td width="136">
2 rollers
</td>
<td width="136">
3 rollers
</td>
<td width="136">
4 rollers
</td>
|
Kecepatan Potong Maks
|
<td width="136">
600 mm/s (All directions)
</td>
<td width="136">
900 mm/s (at 45º direction)
</td>
<td colspan="2" width="272">
1000 mm/s (at 45º direction)
</td>
|
Akselerasi Maks
|
<td colspan="2" width="272">
21.2 m/s<sup>2</sup> (at 45º direction)
</td>
<td colspan="2" width="272">
13.9 m/s<sup>2</sup> (at 45º direction)
</td>
|
Tekanan Potong Maks
|
<td width="136">
2.94 N (300 gf) in 31 steps
</td>
<td width="136">
4.41 N (450 gf) in 38 steps
</td>
<td colspan="2" width="272">
4.41 N (450 gf) in 38 steps
</td>
|
(Tekanan Instan Maks)
|
<td width="136">
(3.2 N (330 gf))
</td>
<td width="136">
(4.9 N (500 gf))
</td>
<td colspan="2" width="272">
(4.9 N (500 gf))
</td>
|
Ukuran Karakter Minimum
|
<td colspan="4" width="544">
Approx. 5 mm alphanumeric (varies depending on character font and type of media)
</td>
|
Pengulangan
|
<td colspan="4" width="544">
Max. 0.1 mm in plot up to 2 m <sup>*1</sup>
</td>
|
Jumlah Alat Yang Digunakan
|
<td colspan="4" width="544">
1 tool
</td>
|
Tipe Pisau
|
<td colspan="4" width="544">
Supersteel
</td>
|
Tipe Pen
|
<td colspan="4" width="544">
Oil-based ballpoint, Water-based fiber-tip pen
</td>
|
Tipe Media
|
<td colspan="4" rowspan="2" width="544">
Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective film. up to 0.25 mm thickness, Polyester film, up to 0.25mm thickness (unguaranteed accuracy)
</td>
|
Potong Perforasi
|
<td colspan="4" width="544">
Yes (performed by force control)
</td>
|
Antarmuka
|
<td colspan="4" width="544">
RS-232C / USB2.0 (Full Speed)
</td>
|
Memory Cadangan
|
<td colspan="4" width="544">
2 MB
</td>
|
Set Perintah
|
<td colspan="4" width="544">
GP-GL / HP-GL™ emulation (Set by the menu or the command. and selects from GP-GL, HP-GL™, or Auto detect)
</td>
|
Layar
|
<td colspan="4" width="544">
Graphic type LCD with backlight (240dots x 128dots)
</td>
|
Registration mark sensing system
|
<td colspan="4" width="544">
Scans the mark by optical sensor (ARMS5.0)
</td>
|
Sumber Daya
|
<td colspan="4" width="544">
100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz
</td>
|
Konsumsi Daya.
|
<td colspan="4" width="544">
120 VA
</td>
|
Operating environment.
|
<td colspan="4" width="544">
10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
</td>
|
(Garansi Akurasi).
|
<td colspan="4" width="544">
(16 to 32 ºC, 35 to 70 % R.H. (non-condensing))
</td>
|
Dimensi (W x D x H [mm]).
|
<td width="136">
672 x 338 x 266
</td>
<td width="136">
900 x 593 x 1046
</td>
<td colspan="2" width="272">
1541 x 736 x 1250
</td>
|
Bobot
|
<td width="136">
10.5 kg
</td>
<td width="136">
21 kg (including stand)
</td>
<td colspan="2" width="272">
40.5 kg (including stand)
</td>
|
Program Bawaan *2
|
<td colspan="4" width="544">
Windows Driver, Graphtec Studio, Cutting Master 3, Plotter Controller
</td>
|
OS Kompatibel *2
|
<td colspan="4" width="544">
Windows 8 / 7 / Vista / XP, Mac OS 10.5.8 to 10.8
</td>
|
Standar Kompatibel.
|
<td colspan="4" width="544">
Safety: cUL / CE mark, EMC: VCCI Class A / FCC Class A / EN55022 Class A
</td>
